Installation; Usage; Recharging The Bluetooth Mouse - Acer Ferrari 4000 User Manual

Installation

Installation of the Bluetooth mouse is simple. Enable Bluetooth functionality by
pressing the Bluetooth communication button on the front panel (see "Closed
front view" on page 2 for the location). Press the Bluetooth button on the base
of the Bluetooth mouse and the operating system will detect and install the
mouse automatically.

Usage

Use the Bluetooth mouse as you would a traditional mouse. For optimal
performance, use a mouse pad. Using the Bluetooth mouse on a transparent or
reflective surface will inhibit the ability of the optical sensor to track the cursor.
The Bluetooth mouse can be used with rechargeable batteries, traditional
batteries, or without batteries and just the USB charging cable.

Recharging the Bluetooth mouse

Your Bluetooth mouse comes with 2 rechargeable AA batteries and a USB
charging cable. To recharge the mouse, plug one end of the charging cable into
your notebook computer's USB port and the other end into the Bluetooth
mouse. Under normal circumstances, it takes approximately 5 hours to fully
charge the Bluetooth mouse.
Important! Do not use the USB charging cable with traditional
non-rechargeable batteries! Doing so may result in equipment
damage or other conditions hazardous to your health.
17