Rear Panel - Pioneer N-30AE-S Instruction Manual

> Before Start > Part Names

Rear Panel


1. AC IN: Connect the supplied power cord.
2. Wireless antenna: Used for Wi-Fi connection. Adjust their angles according to the
connection status.
3. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You
can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
4. NETWORK jack: Connect to the network with an ethernet cable.
5. CONTROL OUT jack: By connecting Pioneer brand amplifiers and CD players,
centralized control is possible, for example you can control the amplifiers and CD players
from the Pioneer Remote App.
6. ANALOG OUT jacks: Use the supplied analog audio cable to connect an integrated
amplifier, for example.
4
> Install > Initial Setup

 
> Playback
Supplementary information | Advanced Setup | Others
1
2
 
E
N

90°
180°