Table of Contents
Advertisement
4.1
Barcode Scanner
The barcode scanner accessory enables the RTC-1010M to read barcodes to perform
various actions. Note: the barcode scanner does not ship with any software or SDKs.
Perform the following test to check if the scanner is working:
1.
Open the Notepad application
2.
Scan a barcode
3.
If the scanner is working, the code will be entered as text into Notepad
For detailed specifications and operating instructions, please refer to the bar code
scanner manual in the driver disk provided.
You can scan the barcode below to change the USB interface type.
Chapter 4 – Accessories
32
Advertisement
Table of Contents
