Page 1
RTC-1010M Semi-Rugged Tablet Computer User’s Manual 1 Last Updated: February 15, 2019...
Page 2
AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
Page 3
Acknowledgement All other products’ name or trademarks are properties of their respective owners. Cortex is the registered trademark of ARM Holdings Android is the trademark of Google Inc. Preface...
Page 4
Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity RTC-1010M 12V power adapter Power Cord (By Order) If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Page 5
(if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to AAEON.com for the latest version of this document. Preface...
Page 6
Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
Page 7
Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO PREVENT DAMAGE.
Page 8
FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Caution: There is a danger of explosion if the battery is incorrectly replaced.
Page 10
China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Panel PC/ Workstation Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB & Other ○...
Specifications System Intel® Celeron™ N3350 1.1GHz Dual core up Processor to 2.4GHz Intel® Pentium™ N4200 1.1GHz Quad core up to 2.5GHz Windows® 10 IOT (Default) Operating System Android 8.1 (Optional) Intel® Celeron™ N3350 Intel® Pentium™ Chipset N4200 Onboard DDR3L 4GB (Default), up to 8GB Memory eMMC 64GB (mSATA III up to 512GB via inside Storage...
Page 16
System I/O Ports MSR reader x 1 (Optional, Without IP protection) G-sensor, E-compass, Gyro-sensor, Sensors Light-sensor Wi-Fi 802.11 b/g/n Bluetooth v4.2 (EDR + BLE) Communication Up to 3 GNSS, GPS + Galileo(Default), Navigation GLONASS, BeiDou (Optional) LTE via mini-card slot (Optional) WWAN (Optional) 2MP front camera Camera...
Page 17
Environmental -20°C ~ 50°C (-4°F ~ 122°F) Operating Temperature -55°C ~ 70°C (-67°F ~ 158°F) Storage Temperature 0% ~ 90% relative humidity, non-condensing Humidity IP54 Environmental Sealing — Vibration Drop height: 76 cm Drop Condition: Based on 2“ plywood over concrete Air charge: +/- 8KV, Contact charge: +/- 4KV UL60950-1, CE, FCC Certifications and Standards...
Page 18
Physical Key Windows Start Key F0 (Windows) BCR Trigger Butten (When BCR is enabled) Screenprint Ctrl+Alt+Del as Soft Reboot Speaker Volume Up Volume Up Speaker Volume Down Volume Down Chapter 1 – Product Specifications...
Product Overview Front View Function Description Power Button (1) Power on or Shut down device (2) Enter Sleep mode NFC Reader Support ISO/IEC 14443A/B, ISO/IEC 15693, MIFARE and FeliCa 2MP Camera 1080p FHD Webcam Light Sensor Ambient Light Sensor Volume Up Speaker volume up Volume Down Speaker volume down...
Page 21
Side View (Left) Function Description DC-in Jack Input: DC 12V USB3.0 Type A x 1, Type-C x 1 Audio Jack 3.5 mm stereo headphone jack HDMI Micro HDMI SIM Card Slot Micro SIM card only SD Card Slot Micro SD card only, Support up to SDXC 2D Barcode Scanner 1D / 2D Barcode Scanner Chapter 2 –...
Page 22
Side view (Right) Function Description Smart card Reader (Optional, without IP Protection) Magnetic Stripe Card Reader (Optional) USB2.0 Type A x 2 Docking Connector Dock with RDS-411 Kensington Lock Device lock Chapter 2 – Getting Started...
Page 23
Rear View Function Description 8MP Camera With LED Flash Mini-card Slot For LTE module (Need to order LTE version) Battery Bay Hot-swappable Battery x 1 Chapter 2 – Getting Started...
If the device is inactive, charging the battery once per month is recommended to prevent deterioration. There are two batteries in the RTC-1010M: Both batteries can be monitored at the title bar). Charge the device once Hot-swappable battery drops below 20%.
Insert the Battery Pack and make sure the battery cover is securely locked. The booting step might take several minutes (It's about 7~9 minutes) Booting Step Booting up AAEON Logo Select start with region / country / yes Is the right keyboard layout / country / yes ...
Touch Controls Gesture Description A single tap will allow users to open any files or applications Single Tap or select text input area Long tapping an icon allows it to be moved freely on the Long Tap screen. This gesture also opens the Android context menu, (Tap and Hold) letting you cut, copy, rename, delete the selected file, or select multiple files for batch actions...
LTE Module Assembly Remove the screws of the LTE module cover Remove the cover Chapter 2 – Getting Started...
Page 28
Remove the tape and pull up the antenna cable Slide the LTE module into the socket Secure the LTE module with the attached screws Chapter 2 – Getting Started...
Page 29
Attach the antenna cable to the MAIN connector of the LTE module Put the LTE module cover back Chapter 2 – Getting Started...
Page 30
Secure the cover with screws Chapter 2 – Getting Started...
Settings Screen The Settings screen allows you to configure some settings of your RTC-1010M which includes: Main Category Sub Category Display Notifications System Apps Power Bluetooth Device Printers Mouse Wi-Fi Networks & Internet Airplane Mode Background Personalization Lock Screen Colors...
Page 33
Location Privacy Camera Windows Update Update & Security Recovery Backup Chapter 3 – Setting Up...
Page 34
To enter the Settings screen From Home Screen 1. Reveal the Charm Bar. 2. Tap Settings Chapter 3 – Setting Up...
3.1.1 System Configure the Display 1. Go to Setting>Systems>Display. ∙Font Size: Adjust the font size here. ∙Display Rotation: You may lock rotation of this display Off or On. ∙Brightness: You may allow the device to adjust the screen brightness automatically. On or Off. Chapter 3 –...
Page 36
Configure Notifications 1. Go to Settings>Systems. 2. Select Notifications & actions. ∙APP: You may show app notifications On or Off. ∙Lock Screen: You may show notifications on the lock screen On or Off. ∙Alarms, Reminders, Incoming VOIP calls: You may show alarms, reminders and incoming VOIP calls on the lock screen On or Off.
Page 37
Configure Apps & Features 1. Go to Settings>Systems> Apps & features. 2. You may view the amount of the space used by each app. Configure Power & Sleep 1. Go to Settings>Systems. 2. Select Power & Sleep. 3. Set up the idle time before the device goes to sleep mode. Chapter 3 –...
3.1.2 Device Add Printers & Scanners 1. Go to Settings>Devices. 2. Select Printers & Scanners. 3. You may add a printer or scanner. Pairing Bluetooth devices 1. Go to Settings>Devices. 2. Select Bluetooth to turn on the Bluetooth. 3. Search and select the device you would like to pair with. Chapter 3 –...
3.1.3 Network & Internet Connecting to a WiFi AP 1. Go to Settings>Network & Internet>Wi-Fi 2. Select one access point from the list. 3. Type in your password and tap Connect Configure Airplane Mode 1. Go to Setting>Network>Airplane mode. 2. You may turn it on to stop all wireless communication. Chapter 3 –...
Page 40
Configure VPN 1. Go to Settings>Network>VPN 2. You may add a VPN connection. Input VPN provider, Connection name, Server name or address and tap Save. Chapter 3 – Setting Up...
3.1.4 Personalization Settings Background/Colors/Lock screen 1. Go to Settings>Personalization>Background. 2. You may personalize the background color and / or lock screen. Chapter 3 – Setting Up...
3.1.5 Accounts Settings Configure Users Accounts 1. Go to Settings>Accounts. 2. You may manage user accounts and setup the properties for each account here. Chapter 3 – Setting Up...
3.1.6 Time & Language Settings Configuring Date & Time 1. Go to Settings>Time & Language. 2. You may change the device's date and time, time zone and time format here. Chapter 3 – Setting Up...
3.1.7 Ease of Access Settings Configure Accessibility 1. Go to Settings>Ease of Access. 2. You may setup system accessibility, including narrator, magnifier, high contrast, closed captions, keyboard, mouse and other options. Chapter 3 – Setting Up...
3.1.9 Update & Security Windows Updates 1. Go to Settings>Update & Security. 2. You may manage windows update, windows defender, backup, recovery and activation here. Chapter 3 – Setting Up...
Barcode Scanner As the name implies, the barcode scanner grants users of the RTC the ability to scan barcodes for a wide variety of purposes. Please note that the scanner does not ship with any software or SDKs. You can perform the following test to check if the scanner is working: Open notepad Scan any barcodes If the scanner is working, the code will be scanned and reflected on the notepad.
Statements Declarations and Safety Statements Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 51
FCC and can be found under the Display Grant section www.fcc.gov./oet/ea/fccid on the FCC ID: RTC-1010M Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
A.2 Canadian Notice IC Regulations This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
A.3 Safety Caution Important Safety Instructions Power Safety Requirement Products with electrical current ratings up to 3A and weighs more than 1 Kg must use approved power cords greater than or equal to: VCTF, 3G or 0.75mm Basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, wash bowl, ...
Page 54
voisinage de la fuite Utiliser seulement le cordon d’alimentation et la batterie indiqués dans le manuel. Ne pas jeter les batteries dans le feu. Elles pourraient exploser. Vérifier les dispositions locales de recyclage. Appendix A – Statements...
A.4 Battery Disposal There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect. Disposer de la batterie en accord avec les instructions.
Page 56
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment.
Page 57
A.5 Battery Caution There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect. Disposer de la batterie en accord avec les instructions.
Page 58
A.6 Adapter Caution This RTC is for use with model NO. FSP036-DHAN3 (AAEON Part number: 1255300365) Ce modèle RTC est à utilizer avec le modèle n° FSP036-DHAN3. (AAEON Référence: 1255300365) Appendix A – Statements...
Page 59
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 60
IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. Appendix A –...