Assembly; Installing Left Grip; Installing Drill; Adjusting Throttle Cable - Maruyama MAG500 Owner's/Operator's Manual

Assembly

Installing left grip

Screw in the left grip to the bracket provided on the frame
and tighten securely.

Installing drill

1. Slide the ring clip and remove the lock pin from the drill.
2. Put the drill onto the auger output shaft and insert the lock pin.
Cover it with the ring clip.
(1) PTO shaft
(2) Clip band
(3) Drill
(4) Lock pin

Adjusting throttle cable

The normal play is 1 or 2mm when measured at
the carburetor side end. Readjust with the cable
adjuster as required.
－ 5 －
Left grip