Screen Calls Without Numbers; Send Call To Answering System; End Call - AT&T CL83217 Complete User's Manual

Smart call blocker

Screen calls without numbers

Send call to answering system

1. When the telephone starts ringing, and the screen displays
Screened call, press
pick up the call. If you have turned on the caller ID announce
feature, the telephone announces "You have a call from..."
and the caller's name. After you picked up the call, the
telephone announces "To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these
options, press *".
2. Press 4 to send the caller to the answering system.
Notes:
The caller is sent to the answering system and can leave a message even if the answering
f
system is off.
To turn on or off caller ID announce, see page 21 and page 32.
f
When the telephone is ringing, you can press
f

End call

1. When the telephone starts ringing, and the screen displays
Screened call, press
pick up the call. If you have turned on the caller ID feature,
the telephone announces "You have a call from..." and the
caller's name. After you picked up the call, the telephone
announces "To answer the call, press 1. To send this call to the
answering system, press 4. To repeat these options, press *".
2. If you do not want to take the call, press
end the call.
/SPEAKER to
or
/CANCEL to mute the ringer temporarily.
OFF
or /SPEAKER to
111
Screened call
PRIVATE CALLER
AM
10:01 10/15
To screen call,
press [SELECT]
AM
10:01
10/15
HANDSET
1 New message
AM
10:01
Screened call
PRIVATE CALLER
AM
10:01
HANDSET
1 New message
to
AM
10:01
1
ANS ON
10/15
10/15
1
ANS ON
10/15