Table of Contents
Advertisement
•
Emergency call
You can dial pre-programmed emergency numbers without any restrictions.
In this case, you can make an emergency call without seizing an outside line.
•
To select the less expensive line automatically, dial "9" or press the Loop-CO button to
seize a line. (Automatic Route Selection) F1 button is already assigned as the Loop-CO
button.
•
Confirming the dialled number before connecting
You can go off-hook after confirming the number you dialled. If you misdial, press the
CLEAR button to clear each number from the right.
•
If you go off-hook first and then misdial, press the FLASH button and enter the number
again.
•
Call information
The following information can be referred to by repeatedly pressing the FWD/DND button
as follows:
< Example >
< Meter >
CO01:
Customising Your PS
•
5.4.3 PBX Programming– Customising the Buttons
Create or re-arrange the Loop-CO button, Group-CO button and Single-CO button.
DECT Portable Station
< Call charge >
1
CO01:
< Call duration >
0.23$
CO 02
5.3 Operation
0:02'28
179
Advertisement
Table of Contents
