Table of Contents
Advertisement
4.2 Customising Your System (System Programming)
Procedure
The basic steps are shown below.
1.
Entering the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
2.
Programming
programme no.
Enter programme
number (3 digits).
•
To delete or change an entry, press CLEAR (TRANSFER).
•
To confirm your entry after storing data:
— The STORE button light: Lights red.
— Confirmation Tone:
One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
•
To exit the programming mode at any time, lift the handset.
150
user password
Dial
.
Enter user password.
SKP +
OR
Press SKP+.
your entry
NEXT
Press NEXT.
Enter your entry
Press NEXT.
SKP –
To continue programming
Press SKP-.
STORE
Press STORE.
To continue entering selections
NEXT
PREV
OR
Press PREV.
SELECT
Press SELECT.
To go to the next/previous programme or entry.
To enter the desired programme or entry.
To end
END
Press END.
Customising Your Phone & System
Advertisement
Table of Contents
