Table of Contents
Advertisement
10.
Mouse
Switches between the normal and mouse
modes.
PgUp, PgDn,
,
Mouse. An icon appears on the screen to
indicate the activation of the mouse mode.
Only available when a PC input signal is
selected.
11.
(Panel Key Lock)
Activates panel key lock.
12.
(Presentation Timer)
Displays the presentation timer settings
menu.
13.
(Volume Up)
Increases the volume level.
14.
Eco Mode
Selects a lamp mode.
15.
LED indicator
16.
(My Button)
Allows user to define a short cut key on the
remote control, and the function item is
selected in OSD menu.
17.
Source
Displays the source selection bar.
18.
3D
Displays the 3D settings menu.
Remote control code
The projector can be assigned to 8 different remote control codes, 1 to 8. When several
adjacent projectors are in operation at the same time, switching the remote control codes
can prevent interference from other remote controls. Set the remote control code for the
projector first before changing that for the remote control.
To switch the code for the projector, select from among 1 to 8 in the SYSTEM SETTING:
ADVANCED > Remote Control Code menu.
To switch the code for the remote control, press ID set and the
number button corresponding to the remote control code set in
the projector OSD together for 5 seconds or more. The initial
code is set to 1. When the code is switched to 8, the remote
control can control every projector.
If different codes are set on the projector and remote control,
there will be no response from the remote control. When that
happens, switch the code for the remote control again.
: active after pressing
9
19.
Exit
Goes back to previous OSD menu, exits
and saves menu settings.
20.
PgUp (Page Up)/PgDn (Page Down)
Operates your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint) when the mouse mode is
activated.
Only available when a PC input signal is
selected.
21.
Pattern
Displays embedded test pattern.
22.
Blank
Hides the screen picture.
23.
(Help)
Displays the HELP menu.
24.
(Mute)
Toggles the projector audio between on
and off.
25.
(Zoom)
Displays the zoom bar that magnifies or
reduces the projected picture size.
26.
Color Mode
Selects an available picture setup mode.
27.
(Volume Down)
Decreases the volume level.
COMP1
COMP2
Auto
Sync
Enter
Menu
3D
Mouse
Pattern
Eco
Mode
HDMI
Source
Exit
PgUp
PgDn
Blank
Eco
Color
Color
Mode
Mode
Mode
Advertisement
Table of Contents
