Acer Aspire G600p User Manual page 42

34
Allows you to set the date and time for your com-
Resume by
puter to boot up.
Alarm
Date (of month) Alarm - Indicate month when sys-
tem will boot up. Set to 0 if you want to boot every-
day.
Time (hh:mm:ss) Alarm - Indicate the hour, minute
and second when system will boot up.
Power Management Mode Table
Mode Doze
Max Saving 1 hour
Min Saving 1 min.
PnP/PCI Configurations
The PnP/PCI Configurations submenu allows you to specify the settings for
your PCI devices. Selecting this option displays the screen below:
The following table describes the parameters found on this submenu. The
settings in boldface are the default and suggested settings.
Parameter Description
Reset Config- When you install a new add-on card and the system
uration configuration caused a serious conflict resulting in an
Data nonbootable operating system, set this parameter to
Enabled to reset the Extended System Configuration
Data (ESCD).
Standby Suspend
1 hour 1 hour
1min. 1 min.
Disabled
Enabled
HDD Power
Down
15 min.
1 min.
Format/Options
Disabled
Enabled