24
The following table describes the parameters found on this submenu. The
settings in boldface are the default and suggested settings.
Para-
Description
meter
Date
Lets you set the date following the weekday-
month-day-year format.
Time
Lets you set the time following the hour-
minute-second format.
IDE Primary
Lets you configure the drive connected to the
Master
master port of IDE channel 1.
To enter the IDE Primary Master setup, press
Enter.
The IDE CD-ROM is always automatically
detected.
IDE Primary
Lets you configure the drive connected to the
Slave
slave port of IDE channel 1.
To enter the IDE Primary Slave setup, press
Enter.
The IDE CD-ROM is always automatically
detected.
IDE Secondary
Lets you configure the drive connected to the
Master
master port of IDE channel 2.
To enter the IDE Secondary Master setup,
press Enter.
The IDE CD-ROM is always automatically
detected.
IDE Secondary
Lets you configure the drive connected to the
Slave
slave port of IDE channel 2.
To enter the IDE Secondary Slave setup, press
Enter.
The IDE CD-ROM is always automatically
detected.
Drive A
Allows you to configure floppy drive A.
Format/Options
Weekday: Sun,
Mon...Sat
Month: Jan, Feb...Dec
Day: 1 to 31
Year: 1980 to 2079
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
[IDE Device Model
Number]
None
[IDE Device Model
Number]
None
[IDE Device Model
Number]
None
[IDE Device Model
Number]
None
1.44 MB, 3.5-inch
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
2.88 MB, 3.5-inch