Connectors And Leds - Cisco SE680 WiMAX User Manual

Connectors and LEDs

1
1
2 CONNECT
3 FAULT
4 ON
5 IN
6 OUT
7
Connector for the two-pin power lead, see "Switching on the
devices" on page 14.
The LED shows whether or not the indoor unit is properly con-
nected with the outdoor modem.
Green: The indoor unit is properly connected with the out-

door modem.
The LED shows whether or not the indoor unit is properly con-
nected with the outdoor modem.
Red: The connection between the indoor unit and the out-

door modem is faulty.
The LED shows that power is being supplied.
Green: The SE680 WiMAX modem is powered correctly.

Ethernet connector for data exchange with a PC or network
(RJ45, 10/100 Base T), see "Connecting a PC or switch" on
page 12.
Ethernet connector for connection with the outdoor modem
(RJ45, power supply and data transmission), see "Connecting
the outdoor modem" on page 12.
Clips for wall mounting
Scope of delivery
2
3
4
5
6
7
9