Restart; Updating The Firmware - Cisco SE680 WiMAX User Manual

Restart

If the SE680 WiMAX is not operating properly, you can reboot it. It should then be ready
for use again.
Open the Advanced Settings tab and on the Administration menu select

Restart.
Click Ok to reboot the device.

A window will appear prompting you to confirm the procedure.

Updating the firmware

If your WiMAX provider provides a new downloadable firmware version for your SE680
WiMAX with new functions or to fix errors, you can update your device quickly and eas-
ily.
First download the relevant firmware file from the Internet and save it on your PC.

Read the information provided carefully.
Only update the firmware if there is a new version of the firmware that is
!
currently installed on your device on the Internet. The firmware version
currently installed is shown under Active image version.
Open the Advanced Settings tab and on the Administration menu select

Firmware Update.
Enter the path and file name of the firmware file to be installed or click Browse to

select a file on your PC.
Click Ok to start the firmware update.

Do not disconnect your SE680 WiMAX from the PC or the power supply
during the firmware update, as this could damage the device. It may take
up to five minutes before the device is ready for use again.
Updating the firmware
33