Maintenance; Cleaning And Maintenance; Figure 5 Manner Of Assembling/Pulling Out The Blow In And Suction - Igloo C3URP Series Instruction Manual

REFRIGERATION LTD

5. MAINTENANCE


Before you start Maintenance on the unit, Power it OFF.

Do not use steel wool, abrasive cleaners, bleach or cleaners containing chlorine or sodium to clean the unit.

Do not use pressure washer or water-jet to clean the unit.

The unit should be cleaned right after unpacking and before turning it on.

The unit should be cleaned with warm water and mild soap.

Make sure to cover the fan motor to prevent moisture damage.

Door gaskets, shelves and supports should be cleaned on a regular basis.

Fan blades and guards should be cleaned with a soft cloth.

5.1 Cleaning and maintenance

 All maintenance services need to be performed after disconnecting the
equipment from power supply!
 Protect electrical components against any damage or water spillage.
 Do not use water stream to clean the equipment, only a moist cloth.
 Do not use any sharp objects to remove dirt!

Figure 5 Manner of assembling/pulling out the blow in and suction

1 – Bottom surface
2 – Blow-in (DO NOT BLOCK the holes!!!)
3 – Suction (DO NOT BLOCK the holes!!!)
Do not use mechanical agents to quicken the defrosting process!
Pastry Display Cases | www.igloorefrigeration.com
11