Kenmore PG-40405S0L Use & Care Manual page 21

Front Doors
□ Attach left and right grease tray brackets to side panels with (8) M4X10 screws. See A
□ Remove the (4) M5x15 screws pre-assembled to the door handle, and use them to attach
handles to doors. See B
□ Insert the pin at the bottom of each door into the hole on the bottom panel. Insert the pin at
the top of each door through the hole in the door bracket hinge. See C
IMPORTANT: If the doors do not line up when closed or do not close freely, the hinges may need
to be adjusted. Loosen the hinge screws, adjust the hinge position as necessary, and retighten
screws. See C.
M4X10 screw Qty: 8pcs
A
B
Hinge screw
C
21