Table of Contents
Advertisement
2.2 Installing the Industrial Serial Server
This section describes how to install your Industrial Serial Server and make connections to the Industrial Serial Server. Please
read the following section and perform the procedure in the order being presented. To install your Industrial Serial Server on a
desktop or rack, simply complete the following steps.
2.2.1 Installation Steps
1.
Unpack the Industrial Serial Server
2.
Check if the DIN-rail bracket is screwed on the Industrial Serial Server or
the Industrial Serial Server, please refer to DIN-rail Mounting section for DIN-rail installation. If users want to
wall-mount the Industrial Serial Server, please refer to the Wall Mount Plate Mounting section for wall-mount plate
installation.
3.
To hang the Industrial Serial Server on the DIN-rail track or wall.
4.
Power on the Industrial Serial
about how to wire the power. The power LED on t he Industrial Serial Server will light up. Please refer to the LED
Indicators section for indication of LED lights.
5.
Prepare Network cables for Ethernet
Use standard network (UTP) cables with RJ45
Use Multi-mode or Single-mode fiber patch cord with LC connector and 100BASE-FX SFP transceiver (ICS-2105AT
only).
6.
Insert one side of RJ45 cable (category 5) or Fiber cable into the Industrial Serial Server Ethernet port
port) while the other side to the network device's Ethernet port (RJ45/SFP port), e.g., Switch PC or Server. The "LNK/ACT"
LED on the Industrial Serial Server will light up when the cable is connected with the network device. Please refer to the
LED Indicators section for LED light indication.
Make sure that the connected network devices support MDI/MDI-X. If it does not support,
use the crossover Category 5 cable.
7.
When all connections are set and all LED lights show normal, the installation is completed.
User's Manual of ICS-2x00T Serial Device Server Series
Server. Please refer to the Wiring the Power Inputs section for knowing the information
connection.
22
not. If the DIN-rail bracket is not screwed on
(RJ45/SFP
Advertisement
Table of Contents
