Wiring The Power Inputs - Planet Networking & Communication ICS-2Serie User Manual

2.1.4 Wiring the Power Inputs

The upper panel of the Industrial Serial Server indicates a DC inlet power socket and consists of one terminal block connector
within 6 contacts. Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or Contacts 5 and 6 for Power 2. Figure 2-1-3
to 2-1-5 show PWR1 and PWR2 of the Industrial Serial Server.
ICS-2100T/ICS-2105AT/ICS-2102T/ICS-2102ST: 9~48V DC or 24V AC

Figure 2-1-3 ICS-2100T/ICS-2105AT Upper Panel

ICS-2200T: 12~48V DC
Figure 2-1-4 ICS-2200T Upper Panel

ICS-2400T: 12~48V DC
Figure 2-1-5 ICS-2400T Upper Panel
2. Tighten the wire-clamp screws for preventing the wires from loosening.
User's Manual of ICS-2x00T Serial Device Server Series
20