Table of Contents
Advertisement
Other Operations
Programmed Playback
The program function enables you to store your
favorite files from any disc or USB device.
A program can contain 20 tracks/files for each
media. (CD, USB) Possible to save a total of 40
tracks/files.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Press C/V on the remote control to select
a track/file.
3. Press PROGRAM/MEMORY to save and select a
next track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER W/S to select the program
number.)
5. Press PROGRAM/MEMORY once again.
To play the programmed list, press d/M after you
make the list.
,
Note
When making or modifying the programmed
list, REPEAT mode is off.
Deleting Programmed list
Deleting function only works in the edit mode.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Select a song by pressing PROGRAM/MEMORY
or PRESET.FOLDER W/S repeatedly.
3. Press DELETE while a song is selected.
,
Note
y Programmed list is cleared in the case
below.
- Removing the disc or the USB device.
- Deleting or recording music files in the
USB device.
- Unplugging the Power Cord.
y Program is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numeric buttons on the
remote control.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
Operating
17
3
Advertisement
Table of Contents
