Cable Installation; Wireless Installation - Philips 6600 Series User Manual

2
In the [Smart TV] mode, press the
Menu > [Connect to network].
» If you need to know the MAC address,
press the
settings] item for view in the smart
TV mode.

Cable installation

To connect the TV to computer networks
and Internet, you need to install a router in
computer networks. Connect your router to the
TV set using a network cable (Ethernet cable).
Connect the router to the network interface
at the bottom of the TV set using a network
cable, and turn on the router before you begin
network installation.
Wired network settings -
automatic search
1
Press .
2
Select [Connection] > [Wired or Wi-
Fi] > [Connect to network] > [Wired
network].
3
Select [DHCP] , then press OK.
» Network protocols will be set
automatically.
Wired network settings - Manual
input
1
Press .
2
Select [Connection] > [Wired or Wi-
Fi] > [Connect to network] > [Wired
network].
3
Selec [Static IP], then press OK.
4
Press , position the cursor in the input
box.
5
And press OK again.
» Display of on-screen keypad.
6
Use the on-screen keypad to enter the [IP
address], [Subnet mask], [Gateway]
and [DNS1] .
26 EN-GB
Menu > [View network
7
After you have entered, select [OK], then
press OK.

Wireless installation

1
Press .
2
Selesct [Connection] > [Wired or
Wi-Fi] > [Connect to network] >
[Wireless network] .
3
Select [On].
» The screen will display the currently set
network parameters, and the wireless
network that can be connected.