Updating The Tv Software; Changing Tv Preferences - Philips 6600 Series User Manual

Channel Deletion
1
Press the OK button to open the Channel
List.
2
Press to select a channel to be
deleted, and press the blue key
remote control to follow the prompt to
confirm or cancel the deletion of the
channel.

Updating the TV software

Philips is continuously striving to improve its
products, and we recommend updating your TV
software after updates are launched.
Check the current software
version
1
Press .
2
Press the Menu, and select [About
the TV] > [Current software info], and
then press OK.
» Display the current software version
information.
Updating software
You can use the following methods to update
software:
• Connecting the network for automatic
updating.
1
Press .
2
Press the Menu, and select [About
the TV] > [Current software info], and
then press OK.
3
Update the software following the on-
screen instructions.
Using USB storage devices for automatic
•
updating.
1
Press .
16 EN-GB
2
Press the
the TV] > [Manual software updates],
and then press OK.
3
Update the software following the on-
screen instructions.
on the
Note
•
Your USB memory stick should be removed
after software update.
• For software update, please use the USB device.
The hard disk may cause the update to fail and
restart because of the excessive demand for the
current.

Changing TV preferences

1
Press
2
Select one of the following items, and then
press OK.
•
•
•
•
•
•
•
•
•
Menu, and select [About
, and select [TV Settings].
[Location]: To select the position of
your TV set.
[Picture and Sound reset]: To
restore all the TV picture and sound
settings to their default values.
[EasyLink]: To set the EasyLink-
related features.
[HDMI Ultra HD]: .HDMI interface
for the HDMI switch can support the
EDID format project, to strengthen
the compatibility with equipment.
[About the TV]: To display the
information about TV.
[Key Beep]: To turn on the button
sound of the remote control.When
the user presses the remote control
button, the TV will give a sound.
[Sleep timer]: To let the TV set to go
into sleep after the set time.
[Clear Cache]: To clear the cache
data from the built-in SD card
partitioning.
[Reinstall TV]: Restore all of the TV
settings to their default values.