Wireless installation Control Panel Remote Control 9 Connecting Devices Use of remote controller Side Connectors Using Philips EasyLink 4 Using TV Media Center Turn on the TV or switch to standby Multi-screen interaction Switch channels To view the connected device(s)
Laboratories. Dolby, Dolby Audio and the this document.Errors reported to Philips will double-D symbol are trademarks of Dolby be applied and published on the Philips support Laboratories. website as soon as possible. Philips and the Philips Shield Emblem are Pixel Characteristics registered trademarks of Koninklijke Philips N.V.
TP Vision Europe B.V. does not the surface or inside of the TV set, please bear any responsibility for accidents, power off the TV.Please contact Philips’ damage or destruction due to incorrect customer service center, do not use the TV wall mounting of the TV set.
Page 6
4 inches or 10 cm around it to ventilate. out of the box until the TV’s temperature Make sure not to allow curtains or other returns to room temperature before it is objects to cover the vents of the TV set. connected to the power outlet.
Page 7
Please correspondingly reduce the screen brightness and contrast when using the TV set in this way. The ghosting, partial ghosting and other traces displayed on the TV screen for the above reasons are not within the scope of this warranty. Disposal of waste products and batteries Your product is designed and manufactured...
3 TV Overview Remote Control Congratulations for purchasing and using Philips product! In order to enjoy all the supports provided by Philips, please register your TV at www.philips.com/welcome Control Panel (Product shape may vary according to the different models, please refer to the actual...
Page 9
x Back h TV Press this button to return to the previous Switch to TV source. channel. i Smart star w Help No function. To open user manual. j EPG To open EPG menu. k SMART TV To enter Smart TV main menu. Color buttons to select corresponding tasks or options.
Use of remote controller The use of this application requires both • mobile devices and smart TV of Philips to When using the remote control, press and hold be in the same LAN. it near the TV set, and point it to the remote * Details about the operation of “Philips smart...
4 Using TV • Although the TV set does not consume much electricity in standby, but still consumes some; only unplugging the power plug can this product This section introduces the basic operations of be completely powered off.If it is not used for a the TV.
To view the connected Press the Mute button on the remote • device(s) control again to restore the sound. Note • Before selecting the external signal source, please turn on the external device. To use the signal source button Press Signal source.
5 Using More Press , select [Language] > [Menu languages], then press Feature of Select the language you want, and then press OK. your TV Rename the external devices After an external device is connected through Accessing the TV menu the signal source menu, you can rename it according to your own preferences.
Page 14
Picture style [Sharpness]: To adjust the sharpness • Apply a predefined picture setting options by of the image. using the picture style. [Soft Blue]: Philips SoftBlue is a • Press the Menu, and select [Picture revolutionary technology reducing the style].
Changes the picture format [Movie expand 16:9]: (This does not apply to Press , select [Picture] > [Picture computer mode.)Adjust the format], and then press picture format from 4:3 to 16:9. Picture format summary [Wide screen]: You can configure the following picture settings. Adjust the picture format from 4:3 to 16:9.
Using application menus [Cinema]: Applies to the sound • settings of movies. Access the options related to the current • [Game]: Applies to the sound settings activity or selection. of games. Press the Menu while watching TV. [Drama]: Applies to the sound •...
Using sleep timer Lock or unlock one or more channels The sleep timer can switch the TV to standby after a predefined time. Press the OK button to open the channel list. After you select a channel to be locked •...
The hard disk may cause the update to fail and restart because of the excessive demand for the Updating the TV software current. Philips is continuously striving to improve its products, and we recommend updating your TV software after updates are launched. Changing TV preferences...
Watching TV demos You can better understand the functions of TV from the TV demos. Some models do not have this function. Press Select [TV Settings] > [Location] > [Shop], and then press OK to watch. Settings when reset to the factory settings You can reset the picture and sound settings to the factory settings.
44.1kHz, 640kbps or data loss.For no support for USB storage files only) 48kHz devices, Philips assumes no responsibility, and shall not be liable for any damage or loss of data EAC3 32kHz, 32Kbps ~ in the device. 44.1kHz, 6 Mbps •...
Viewing photos and playing Please read the option music and videos from a instructions connected USB storage device. Turn on the TV. Change the slide show settings Connect the USB storage device to the USB slot on the side of TV set. Press Menu when playing a slide.
Please read the option Please read the option instructions instructions Playing music while viewing slides Enable the Family You can play background music while viewing entertainments sharing to view slides. photos and play music and Select a music album. videos Press OK.
View photos Watch the movie Select Picture in the browse page, then Select video in the browse page. press OK. Press OK to play the movie. Select a photo and press OK. Return to the browse page Return to the browse page Remove the USB storage Listen to music device...
7 Installing Select [Channels] > [Analog channel channels manual installation] > [Find channel]. Channel frequency can be entered • directly. The first time you set up your TV, you are Select [Search], and press OK to • prompted to select a menu language and start the search.
• Memory space does not mean the usable space. • Philips reserves the right to increase and decrease the right of part of the applications. • Do not arbitrarily change the ROM of the TV, and any resulting failure is not covered under warranty.
In the [Smart TV] mode, press the After you have entered, select [OK], then Menu > [Connect to network]. press OK. » If you need to know the MAC address, press the Menu > [View network settings] item for view in the smart Wireless installation TV mode.
9 Connecting R-AUDIO-L VIDEO Devices This section describes how to connect devices with different connectors. Note • You can use different types of connectors to connect a device to your TV. Side Connectors a Coaxial output Digital audio output to home theater systems and other digital audio systems.
Page 30
Select a supported screen resolution • e Antenna/cable TV on your computer. Signal input from an antenna or cable. Connecting to your computer through one of the following interfaces: HDMI cable • ANTENNA f USB 1 / USB 2 Data input into USB storage devices. g Connecting computers Before you connect your computer to your •...
Turn on or off EasyLink and transmit the TV audio to the connected HDMI-CEC audio device. Note • Pease do not enable Philips EasyLink if you do Media Center not intend to use it. You can browse the pictures, videos or music Press and other multimedia files in the USB devices or local media.
Multi-screen interaction You can use a mobile device, such as a Philips W8510, to display the content (the contents to be displayed depends upon the mobile device) on the screen of the mobile device on the TV screen through multi-screen interaction,...
Video playback: NTSC, PAL • Tuner bands: UHF, VHF • Product information may be subject to change without prior notice.For detailed product Intrinsic Resolution/Sound information, please go to www.Philips.com/ support power Intrinsic Resolution • Supported input signal formats 50PUD6683/30: 3840 x 2160 •...
16MM (without 300 × 200 gaskets), and the Supported TV Mounts maximum thread To install the TV set, purchase a Philips TV length of 26MM mounting bracket. (without gaskets)) Warning • Please follow all the instructions provided with the TV mounting bracket.
• If there is only one channel having poor Philips customer service center. reception, please fine tune this channel. Poor picture quality of the device connected Forget the code to unlock the TV lock: thereto: •...
Check that the sound balance is set to the set in the following Web site: middle. www.philips.com/support. If the problem is still not resolved, please contact your local Philips customer service center. HDMI connection problem Warning HDMI has a problem: •...
12 Index solely for your personal use. The Software is “in use” when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device. 2. Ownership. The Software is licensed and not sold to you.
Page 38
Content providers are using the digital rights owners and may be protected by applicable management technology for Windows Media copyright or other intellectual property laws and (“WM-DRM”) to protect the integrity of their treaties. This Agreement grants you no rights content (“Secure Content”) so that their to use such Secure Content.
Page 39
AND CONDITIONS, WHETHER EXPRESS means or methods. Such upgrades may be OR IMPLIED, INCLUDING BUT NOT made available pursuant to the terms of this LIMITED TO THE IMPLIED WARRANTIES Agreement or the release of such upgrades OF MERCHANTABILITY, FITNESS FOR A to you may be subject to your acceptance of PARTICULAR PURPOSE, AND ACCURACY another agreement.
Any dispute between you and TP Where you install an application program not VISION regarding this Agreement shall be provided by Philips Smart Television APP Store, subject to the non-exclusive jurisdiction of the you are deemed to have been fully aware of the courts of your country of residence.
Page 41
any other open source licenses.It indicates that Source: http://www.isc.org/downloads/dhcp/ to obtain the copy of the software can be found FFmpeg (2.8) in the instructions for use. TP Vision Netherlands B.V. does not make Source: http://www.ffmpeg.org/ARM GPU drive any guarantees, nor any express or implied (r6p0-01rel0) Mali-400/450 GPU Linux Kernel warranties, including any warranty of Device Drivers (r6p0-01rel0)
Page 42
China Rohs law Requirement of Usage Control on Electrical and Electronic Product Hazardous Substances Names and Levels of Hazardous Substances Contained in this Product Hazardous Substances Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Part Name (Pb) (Hg) (Cd) chromium biphenyls (PBB) diphenyl ethers (Cr(VI)) (PBDE)