Updating The Tv Software - Philips 43PFD5773/30 User Manual

Using sleep timer
The sleep timer can switch the TV to standby
after a predefined time.
Tip
• You can turn off the TV in advance, and can reset
the sleep timer during the countdown.
1
Press , and select [TV Settings] >
[Sleep timer]
» Display of sleep timer.
2
Select a preset time between 0-180
minutes.
» The sleep timer can be set with the
unit of 10 minutes.If the timer is set to
0, the sleep timer will be shut down.
3
Press OK (確認) to start the time timer.
» When the preset time is due, the TV
set will switch to the standby mode.
Use of TV lock
By locking the TV for control, you can prevent
children from watching certain TV shows or
channels.
Setting or changing code
1
Press , select [Channels] > [Child
lock] > [Set code].
2
Enter your password using the number
keys on your remote control.
» Set or change your code following the
instructions on the screen.
Tip
•
If you have forgotten your code, please enter
'8888' to overwrite the existing code.
Locking or unlocking one or more
channels
1
Press the OK (確認) button to open the
channel list.
14 EN-GB
2
Select the channel you want to lock or
unlock, press
lock or unlock the channel.
» If it's your first time to watch a locked
channel, you will be asked to enter
your code.
3
The channel locking function will
immediately take effect after setting.
Note
• When you use the channel list or number keys
to select a locked channel, it will remind you that
you need to enter a code.

Updating the TV software

Philips is continuously striving to improve its
products, and we recommend updating your TV
software after updates are launched.
Check the current software
version
1
Press
2
Press the OPTIONS（應用選單）,
and select [About the TV] > [Current
software info], and then press OK (確
認).
» Display the current software version
information.
Updating software
You can use the following methods to update
software:
Connecting the network for automatic
•
updating.
1
Press .
2
Press the OPTIONS（應用選單）,
and select [About the TV] > [Auto
software updates], and then press OK (
確認).
3
Update the software following the on-
screen instructions.
Using USB storage devices for automatic
•
updating.
on the remote control, to