Event - Eneo 213013 User Manual

Full Menu Setup

3-6. Event

3-6-1. Triggers
Motion :
●
Motion detection is used to generate an alarm whenever movement occurs
(or stops) in the viewer. Up to 8 Motion and/or Mask windows can be created and
configured. Once motion detection windows are configured, this camera can be
configured to perform actions when motion is detected. Possible actions include
uploading images, alarm out and E-mailing.
> Sensitivity : Configure the sensitivity for the motion detection from 10 to 100.
Higher value is more sensitive.
> Dwell : Configure the hold time an event lasts for the specified hold time from
the point of detection of a motion.
46