Toshiba RS-TX60 Viewer's Manual page 94

C h a p t e r 6
With Dial Tone Detection and
'Phone Avail.' Detection both turned
®
off, if you happen to be talking on the
phone when the DVR tries to call you will
hear the modem dial and try to connect to
the TiVo service.
86
If you are experiencing "Failed, Line unavailable" errors, or if the DMS is not making
daily calls, you may have a low-voltage phone system that the DMS cannot detect. In
this case, it's best to have 'Phone Avail.' Detection off.
Set Dial Tone Detection. This setting is on by default. If you leave it on, the DMS will
check for a dial tone before it starts dialing. However, if you have a non-standard dial
tone, or a stuttering dial tone (as some voice messaging systems have), the DMS will
be unable to detect the dial tone and will not make its call.
Restore previous options. The DMS must make a successful test phone call before it
will accept changes to Phone Dialing Options. If you want to restore your previous
dialing options and continue past this screen without making a test phone call, select
"Restore previous options."
M e s s a g e s & S e t u p