Getting Started - Toshiba RS-TX60 Viewer's Manual

Questions About Getting Started
I don't see the Welcome Screen when I plug in my DMS for the first time.
• Make sure cables are connected from the OUT jack of one device to the IN jack of another. Never connect OUT to OUT or IN to IN.
• Make sure your TV is displaying video from the input you used to connect your DMS to your TV. You may need to use the Input,
Source, or TV/Video button on your TV's remote to change video sources. If you are having trouble changing the video source, refer
to your TV's owner's manual.
• If you connected your DMS to a VCR (instead of directly to your TV), tune your TV the way you would to watch your VCR. Also,
try turning your VCR on or off. If your VCR has multiple inputs, you may need to select the correct input on the VCR as well.
• If your DMS is connected to an A/V receiver, and you are having trouble finding the correct input, try connecting it directly to the
TV instead.
• The cables you are using to connect your DMS to your TV or other equipment may be damaged or defective. Try exchanging the
cables connected to the DMS with other cables that you know are working properly.
My phone jack isn't near the DMS.
• The DMS comes with a 25 foot phone cord. Phone cords longer than 25 feet are available at most hardware or electronics stores.
• After you complete Guided Setup, you can connect your DMS to a home network and use a broadband Internet connection instead of
a phone line to connect to the TiVo service. See Chapter 8 for details.
My TiVo remote control doesn't control my TV's power, volume, etc.
• You can program the TiVo remote control to turn your TV on and off, and control its volume and mute functions. You can also
program it to control volume and mute on an A/V receiver or stereo. See "Remote Control & DMS Front Lights" on page 76.
Q u e s t i o n s A b o u t G e t t i n g S t a r t e d
9
131