Scan Using The Scan Button On Your Brother Machine; Scan Using The Scan Button On The Machine - Brother MFC-J775DW Basic User's Manual

Scan Using the Scan
Button on Your Brother
Machine
Scan Using the Scan Button
on the Machine
Use the Scan button on the machine to
make temporary changes to the scan
settings. To make permanent changes, use
Brother's ControlCenter software.
1
Do one of the following:
• Place the document face down on
the scanner glass.
• Place the document face down in the
ADF.
(If you are scanning multiple pages,
we recommend using the ADF.)
2
Press (SCAN).
3
Press a or b to select the [Scan to
File] option, and then press OK.
4
If the machine is connected over the
network, press a or b to select the
computer where you want to send data,
and then press OK.
If the LCD prompts you to enter a PIN,
use the control panel to enter the four-
digit PIN for the computer, and then press
OK.
5
Do one of the following:
• To change the settings, go to the next
step.
• To use the default settings, press
Black Start or Color Start.
[Scan Type] depends on the default
settings. Pressing Black Start or Color
Start does not allow you to change the
settings.
6
Press a or b to select the [Scan
Settings] option, and then press OK.
To use the [Scan Settings] option, a
computer with the ControlCenter software
installed must be connected to the
machine.
7
Press a or b to select the [Set at
Device] option, and then press OK.
8
Select the scan settings you want to
change, and then press OK.
• [Scan Type]
Select the scan type for your
document.
• [Resolution]
Select the scan resolution for your
document.
• [File Type]
18