Table of Contents
Advertisement
Manual Objectives
This manual describes in detail the BCM BC206C Main board.
We strongly recommend that you study this manual carefully before attempting to interface with BC206C or
change the standard configurations. Whilst all the necessary information is available in this manual we
would recommend that unless you are confident, you contact your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that make booting
impossible. If this should happen, clear the CMOS settings, (see the description of the Jumper Settings for
details).
If you have any suggestions or find any errors concerning this manual and want to inform us of these,
please contact our Customer Service department with the relevant details.
Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you
work with the hardware. Do not make connections while the power is on. Sensitive
electronic components can be damaged by sudden power surges. Only
experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the
mainboard. Modern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag when they are not
in the chassis.
Document Amendment History
Revision
st
1
(1.00)
1.01
1.02
Date
Feb, 2012
Initial Release
Oct, 2012
Update BIOS section
Oct, 2013
Update memory module max support from
4GB to 8GB per slot
Comment
6
Advertisement
Table of Contents
