SMC Networks SMCWBR14-3GN User Manual page 39

• Pin Code: Specifies a PIN code number that corresponds with that set on your 3G/
3.5G USB modem and displays the status of the 3G connection.
- Not dial yet: Indicates that the PIN code has not been entered or is incorrect.
- Authenticated successfully: Indicates that the 3G connection has
authenticated successfully.
• Dial Code: A dialled access code that connects the USB device to the service
provider.
• APN Service: The name that uniquely identifies the cellular operator, access point
name (APN).
• 3G Username: The username of the account registered with the service provider.
• 3G Password: The password of the account registered with the service provider.
PPTP
Enable the Point-to-Point Tunneling Protocol (PPTP) for implementing virtual private
networks. The service is provided across the internet in the European countries. The
dual WAN option is disabled in the following example.
• PPTP Network Mode: Sets a PPTP network mode. (Default: DHCP)
• IP Address: Sets the static IP address. (Default: 0.0.0.0, available when PPTP
Network Mode is set to static IP.)
• Subnet Mask: Sets the static IP subnet mask. (Default: 255.255.255.0, available
when PPTP Network Mode is set to static IP.)
Figure 4-12. Setup Wizard - WAN PPTP
Using the Setup Wizard
4
4-9