Page 1
INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
............4 Check Screen Factory Reset VS Initial Setting INSTALLATION MENU ....5 - USB Cloning ..............13 Ez Download - LG Digital Signage Setup menu ........5 Receive from USB Signage Mode Operation Send to USB Power On Status Logo Image Download Key Operation...
Page 3
- ISM Method ..............26 Mode Timer Period Time Still Image Detecting and ISM Method Bar Image Bar Color Bar Transparency Bar Direction User Image - Easy Brightness Control ..........30 - SuperSign Server Setup ..........31 Player Name Server IP Setting Server IP Status - Holiday Schedule ............32 - No Signal Image ..............33 - Crestron ................34...
HDMI (DTV) No Signal When the Installation Menu is displayed, select the desired item. Installation Menu (V 3.0) Installation Menu (V 3.0) LG Digital Signage Setup LG Digital Signage Setup SuperSign Server Setup USB Cloning Holiday Schedule Password Change No Signal Image...
INSTALLATION MENU NOTE • Default values may differ by region. LG Digital Signage Setup menu • Use this menu to configure the Digital Signage after in stallation. LG Digital Signage Setup Installation Menu (V 3.0) Installation Menu (V 3.0) LG Digital Signage Setup...
IR Operation / Local Key Operation • This feature allows you to set how the product operates after receiving a signal from a LG remote control or local key. (0 - Normal, 1 - Use PWR Only, 2 - Block All) •...
Menu Display • Setting this feature to Yes will display the menu. Setting this feature to No will hide the menu. • However, even if you have set this feature to No, you can easily open the Installation Menu by pressing and holding the Menu button for more than 5 seconds.
Wake On LAN • Set whether to use the ‘Wake On LAN’ feature. • You can set ‘Wake On LAN’ to On or Off. • If you set this feature to On, ‘Wake On LAN’ is enabled and you can turn the product on remotely via a LAN. •...
Intelligent Auto • You can set this feature to On (enabled) or Off (disabled). • If you change the screen resolution after setting this feature to ‘Yes’ , the display is automatically adjusted to the new resolution. (This feature may not be available with some models.) Master/Slave Mode •...
Sync Mode • This feature allows you to sync the start times of contents (videos or images that have been distributed by SuperSign Software) played back on the Master and Slave monitors. • If you set Sync Mode to Off, the sync feature is disabled. •...
Factory Reset • This feature allows you to restore all set values to their factory default values. • If you set this feature to Yes, all Signage settings except UTT setting (the Signage panel’s operational hours) are restored to their factory default settings. (This feature may not be available with some models.) All user settings will be reset.
LG Digital Signage Setup Initial setting / Factory Reset Off/5sec/10sec/15sec/1min/3min/5min/10min 10min Power On Status LST, STD, PWR Key Operation Yes/no IR Operation Normal/Use PWR Only/Block All Normal Local Key Operation Normal/Use PWR Only/Block All Normal Limited Mode Yes/No Input Source Change...
- If you check the EPK item, the Display EPK Version , SPI Boot, and LG Boot Logo items are enabled. - If you check both the EPK and JPG items, the LG Boot Log item is disabled; if you uncheck the JPG item after wards, LG Boot Log item is enabled.
Current : 02.00.00.01 EPK : 02.00.00.01 [TLL] GlobalClone99999.TLL [ Forced Update Option ] SPI Boot [EPK] M1A_ATSC_KR_RevNo2800_V01... LG Boot Logo [No Signal Image] Max Size : 1024KB Total Size : 0KB [ISM Bar Image] Max Size : 1024KB Total Size : 0KB...
Send to USB Send To USB USB Cloning Select file type Ez Download Global TLL Receive from USB Model TLL Send to USB Select the file name and press OK to start Logo Image Download ꔠ Send to Daisy Chain GlobalClone00001.TLL ꔡ...
Logo Image Download This feature allows you to download splash image files onto your monitor. Create a ‘LG_MONITOR’ folder on your USB flash drive and copy a splash image file into the folder. Select the desired image file using the buttons and press the OK button.
Send to DaisyChain This feature allows you to copy the settings of a monitor to other monitors using RS-232C. Transfer the settings of your current monitor to other linked monitors via RS-232C outputs. The settings of the foremost monitor are copied, while the settings for other monitors in the RS-232C daisy-chain are not.
You can change your password for security purposes. Enter a new 4-digit number in Change Password. Enter the same number again in Confirm Password to confirm the password. Installation Menu (V 3.0) LG Digital Signage Setup Password Change USB Cloning Change Password...
Set ID Setup This feature allows you to set an ID for the product. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Set ID Setup Password Change Set ID Setup Set ID Setup Set ID Lock Configuration Setup...
Be sure to execute Auto Set ID/Reset ID when Picture ID is set to Off. Configuration Setup • This feature enables a detailed configuration of the product. Installation Menu (V 3.0) LG Digital Signage Setup Configuration Setup USB Cloning Password Change Splash Offset Time...
4 hours, 6 hours, or 8 hours. • If you set this option to Off, the Automatic Standby feature is disabled. Screen Saver Cube • This Screen Saver feature lets you enable/disable the 360-degree-rotating LG Cube which appears on the screen when there is no signal.
• This feature allows you to select an input that you want to restrict. The selected input is automatically restricted according to your settings. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password Change Lock Mode Set ID Setup...
External Speaker / Audio out • This feature enables the transfer of analog/digital audio signals from your monitor to external devices. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password Change Set ID Setup External Speaker / Audio out...
Fail Over • This feature enables automatic switching to another input signal when there is no signal from the current input. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Fail Over Password Change Set ID Setup Mode Configuration Setup...
Page 25
NOTE • The number of priorities may vary depending on the model. • If you set Mode to Off, all of its sub-options are disabled. • If you set Mode to Auto, the Priority menus are disabled. • If you set USB to Movie or Photo, the USB Auto Playback option in Configuration Setup is disabled, and the corresponding function is also disabled.
If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Installation Menu (V 3.0) ISM Method LG Digital Signage Setup Normal Mode USB Cloning...
Timer • Immediately: Performs the ISM function immediately after the ISM Method menu window disappears. The Period/ Time option is disabled. a) Inversion: Inverts the screen every 30 minutes. b) Orbiter: The image moves 3 pixels every 2 minutes in a certain order. c) User Image: Displays the image on repeat until you press the EXIT button on your remote control.
Bar Image • Off: Displays a bar with a fixed resolution of 300 x 1080, then moves the bar. • On: Displays a user-downloaded image, and moves the image. NOTE • Images can be displayed at your desired size without a size limit. (However, the image height is fixed at 1080.) •...
User Image • This feature enables the playback of your desired photos and movies using your USB storage device. (If you select User Image, the contents options of Movie and Photo are enabled. - Movie: Plays movies stored in the ISM (or ism) folder on your USB storage device - Photo: Plays a slide show of images stored in the ISM (or ism) folder on your USB storage device.
Easy Brightness Control The backlight is adjusted according to your schedule(s). Easy Brightness Control Easy Brightness Control Installation Menu (V 3.0) Mode Mode Configuration Setup Hour Hour Lock Mode Minute Minute External Speaker / Audio out Backlight Backlight Fail Over ISM Method Add Schedule Add Schedule...
SuperSign Server Setup • This feature is used to link with the SuperSign software. Installation Menu (V 3.0) Configuration Setup Lock Mode External Speaker / Audio out SuperSign Server Setup Fail Over ISM Method Press OK Player Name Easy Brightness Control Server IP Setting Press OK SuperSign Server Setup...
Holiday Schedule This feature allows you to specify holidays (unit: day) when the product will not be used. Installation Menu (V 3.0) Holiday Schedule Holiday Schedule Configuration Setup Lock Mode Add Schedule Add Schedule External Speaker / Audio out Fail Over January 1 ~ January 1 ------------------- ISM Method...
No Signal Image This feature allows the screen image to be changed when there is no signal. No Signal Image Installation Menu (V 3.0) Disable Configuration Setup No Signal Image Mode Lock Mode Original External Speaker / Audio out Slide Time 5 sec Fail Over ISM Method...
Crestron • This function allows synchronization with an application provided by Crestron. • Server: This menu sets the IP for the network connection with the server (equipment provided by Crestron). • Port: This menu sets the port for the network connection with the server. The default port number is 41794. •...