Sharp PN-L601B Software Manual page 37

n Moving an object
You can move an object by selecting the object and dragging it.
n Enlarging/reducing an object
1. Select an object.
2. Drag the select point.
• Dragging the select point on the vertex enlarges/reduces
the object with the same aspect ratio.
• Dragging the select point on the side enlarges/reduces the
object in the direction of either width or height.
• The line width remains the same after the object is
enlarged/reduced.
n Rotating an object
1. Select an object.
2. Drag the select point at the center top.
Or, select "Rotate Right", "Rotate Left" or "Rotate 180
degrees" from "Rotate" in the expansion menu.
n Copying an object
You can copy an object to the clipboard.
1. Select an object.
2. Select "Copy" from the expansion menu.
n Cutting an object
You can cut an object and save it to the clipboard.
1. Select an object.
2. Select "Cut" in the expansion menu.
n Pasting an object
To paste the object in the clipboard, select "Paste" in the expansion menu.
Select point
13
E
Select point