RUGGEDCOM RS900GPF
Installation Guide
Section 2.4.2
Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RS900GPF can be equipped with panel adapters that allow the device to
be attached to a panel in multiple orientations.
Figure 4: Panel Mount Options
1. Rear Mount Orientation 2. Front Mount Orientation 3. Side Mount Orientation
1.
Secure the adapters to the device in the desired orientation.
2.
Place the device against (side or rear mount orientation) or insert it into (front mount orientation) the panel
and align the adapters with the mounting holes.
Mounting the Device to a Panel
1
2
Chapter 2
Installing the Device
3
9