Chapter 2
Installing the Device
Figure 5: Panel Mounting (Rear Mount Orientation Shown)
1. Panel Adapter 2. Screw
3.
Install #6 screws (not supplied) to secure the adapters to the panel.
Section 2.5
Grounding the Device
The RUGGEDCOM RS900GPF chassis features a threaded hole for connecting the device to ground (Earth). It is
recommended to terminate the ground connection with an M3 ring or spade lug, and then torque to 1.7 N·m (15
lbf-in).
10
1
1
2
2
RUGGEDCOM RS900GPF
Installation Guide
Grounding the Device