Activating Airdry; Before First Use - Zanussi ZDT22003FA User Manual

• The indicator
4. Press the on/off button to confirm the setting.

ACTIVATING AIRDRY

AirDry improves the drying results with less energy consumption.
By default, AirDry is activated with all programmes excluding
deactivate it.
While the drying phase operates, the device opens the appliance door. The door is then kept
ajar.
While the appliance is in user mode, within about 5 seconds:
1. Press the programme button twice.
• The indicators
• The indicator
2. Wait until the indicators
• The indicator
3. Press the programme button to change the setting.
• The indicator
4. Press the on/off button to confirm the setting.
CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as
opening the door may pose a danger.

BEFORE FIRST USE

1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
8
is on = the acoustic signal is activated.
and are on.
flashes.
and are off.
is on = AirDry is activated.
is off = AirDry is deactivated.
(if applicable) but it is possible to
Do not use detergent and do not put dishes in
the baskets.
After starting the programme, the appliance
recharges the resin in the water softener for up to 5
minutes. The washing phase starts only after this
procedure is complete. The procedure is repeated
periodically.