Baumatic BMIC4644X User Manual page 31

o WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance is supplied with a mains supply cable. It must be wired
into a 16A double pole switched fused spur outlet, having 3 mm
contact separation and placed in an easily accessible position
adjacent to the appliance. The spur outlet must still be accessible
even when your microwave is located in its housing.
o The wiring in the mains lead is coloured as follows:
Brown
Blue
Green and yellow
o As the colours of the wires in the appliance's mains lead may not
correspond with the coloured markings identifying the terminals in
your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked "L"
(live), or coloured red.
The blue wire must be connected to the terminal marked "N"
(neutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked "E" (earth), or by the earth symbol, or coloured green and
yellow.
o When the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the outer
sheath.
o Broken or damaged power leads must only be replaced by a suitably
qualified person. A power lead of a similar type must be used in
replacement.
Before beginning to install your appliance, check that
there is no sign of damage (on the inside or the outside
of the microwave), and that there are no packing
materials or accessories inside the cavity. Remove any
protective film on the microwave.
Live
Neutral
Earth
31