M-system R7L-RR8 Instruction Manual page 6

• Configuration Properties
CONFIGURATION NETWORK
PROPERTY VARIABLE
SCPTdirection ----
SCPTmaxSendTime
----
[Number of fb]
SCPTminSendTime
----
[Number of fb]
SCPTlocation ----
SCPToemType ----
SCPTserialNumber ----
TYPE
{ Range }
{ Default }
{SNVT_state}
{0 or 1}
{0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0}
{SNVT_time_sec}
{0.0,10.0...3600.0}
{0.0}
{SNVT_time_sec}
{0.0,0.2...3600.0}
{1.0}
{SNVT_str_asc}
{30-character string}
{""}
{SNVT_str_asc}
{e.g. "R7L-RR8_VER:0.10"}
{SNVT_str_asc}
{e.g. "ZZ123456"}
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EXPLANATIONS
Bit 0, Bit 1: Setting the extension module (Power supply
must be reset when this configuration property is changed.)
0,0 : Without extension module
1,0 : Discrete input (fb and other settings assigned to the 9th
and following points are invalid with 8-point input module.)
0,1 : Discrete output (fb and other settings assigned to the
9th and following points are invalid with 8-point output
module.)
Set this property before an extension module is connected.
Bit 2 through Bit 15 : Invalid
Maximum time interval to send network variables (per fb).
(Power supply must be reset when this configuration prop-
erty is changed.)
Network variables are sent out in the specified intervals
even when there is no change in the value.
No sending when a value less than 10.0 is set.
Invalid property when the assigned fb has no network vari-
ables to be sent to the network.
Minimum time interval to send network variables (per fb).
(Power supply must be reset when this configuration prop-
erty is changed.)
Network variables are sent out in the specified intervals
even when there are changes in the value faster than the
interval.
No sending when a value less than 0.2 is set.
Invalid property when the assigned fb has no network vari-
ables to be sent to the network.
Used to write Tag No. (name)
Used to indicate Model No. and Version
Used to indicate Serial No.
R7L-RR8
EM-7804-T Rev.6 P. 6 / 14