Panasonic Easy Take NR-B182W Operating Instructions Manual page 7

4. Plug into a wall outlet.
After removing the power cord, set the evaporation pan correctly.
Plug into a wall outlet of the rated voltage on its own with the rated current and insert plug fully.
The power plug can be plugged into an outlet immediately after installation.
The surroundings and surfaces (side surfaces) of the refrigerator may become hot (approximately
50 °C to 60 °C when the ambient temperature is 30 °C) when the power is turned on, but this is not
abnormal.
If the power plug is removed, wait at least 7 minutes before plugging it back in.
5. Cool the refrigerator interior.
It may take approximately four hours to cool down the interior.
It may take 24 hours or more to cool down the interior and achieve
equilibrium in the summer, etc.
Do not open/close the doors until the interior has cooled down
sufficiently.
● Warm air flowing into the interior will block the cooling function.
Request:
● Do not peel the seal on the back.
The filling openings of a thermal insulation material.
Peeling them off causes a decrease in chilling.
If you have peeled it, then cut a cloth packing tape into a square and
paste it.
Installation
Seal on the back side
of the refrigerator
(both sides)
Compressor Compressor
Evaporation pan Evaporation pan
Refrigeration circuit
(piping)
7