Wiring Connections; Removal Of The Main Unit - Pyle PLCD43MRB User Manual

INSTALLATION
DIAGRAM
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
- Only use speakers with 4 ohms impedance.
- Do not attach the control panel to the chassis before wiring is complete.
- The maximum current of the auto antenna is 200mA.

Wiring Connections

WIRING
DIAGRAM
Radio Antenna Socket
White: Left CH Auxiliary RCA Audio Input
Red: Right CH Auxiliary RCA Audio Input
White: Front Left CH RCA Audio Output
Red: Front Right CH RCA Audio Output
Red: Rear Right CH RCA Audio Output
White: Rear Left CH RCA Audio Output
CAUTION
+12V DC
NEGATIVE
GROUND

Removal of the Main Unit

1. Remove the metal strap from the main unit.
2. Remove the plastic trim out from the main unit.
3. Insert a bracket key into the left and right side of the main unit and draw the unit out of the mounting
sleeve.
DASH BOARD
HEX NUT
HEX NUT
GND - (Black)
Power B+ (Yellow)
ACC + (Red)
ANT + (Blue)
CONSOLE
MOUNTING SLEEVE
HEX BOLT
- 4 -
15A FUSE 15A
Purple
Rear Right
Speaker
Purple/Black
Gray
Front Right
Speaker
Gray/Black
White Front Left
Speaker
White/Black
Green
Rear Left
Speaker
Green/Black