Table of Contents
Advertisement
Connecting antenna or cable / satellite set-top box
Be sure your antenna or another device is connected properly before
plugging in the AC power cord.
If connecting to an antenna through an RF cable
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Antenna
IN
IN
IN
RF cable
RF cable
RF cable
If connecting cable / satellite set-top box using an RF cable
If the TV is connected to a cable or set-top box via a coaxial connection,
set the TV to channel 3/4 or the channel specified by the service
provider.
Antenna
Antenna
Antenna
IN
IN
IN
RF cable
RF cable
RF cable
If connecting cable / satellite set-top box using an HDMI
cable
If the TV is connected to a cable / satellite set-top box via an HDMI cable,
make sure you select the correct source by using SOURCE.
IN
IN
IN
HDMI cable
HDMI cable
HDMI cable
If connecting cable / satellite set-top box using component
video input
If the TV is connected to a cable / satellite set-top box via component
video input, make sure you select the correct component video source
by using SOURCE.
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
IN
IN
IN
IN
IN
IN
Component (Y/Pb/Pr)
Component (Y/Pb/Pr)
Component (Y/Pb/Pr)
video cables
video cables
video cables
Cable
OUT
RF cable
IN
IN
IN
OUT
Set-top box
RF cable
RF cable
IN
IN
OUT
OUT
Set-top box
RF cable
OUT
IN
OUT
Set-top box
Connecting a cable / satellite set-top box, Blu-ray
Disc™ / DVD recorder via composite connectors and
analog audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals from the TV.
RF cable
RF cable
RF cable
RF cable
RF cable
RF cable
IN
IN
IN
IN
IN
IN
Audio (L/R) +
Audio (L/R) +
Audio (L/R) +
Video cables
Video cables
Video cables
Note(s)
If you have any question about the DTV's antenna, visit www.antennaweb.org for further
●
information.
Depending on your antenna system, you may need different types of combiners
●
(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these
devices is 2,000MHz or 2GHz.
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from
●
the antenna input jack before moving the unit.
If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor
●
or attic antennas will be more effective than a set-top box or inside antenna.
To turn on your reception source easily between antenna and cable, install an antenna
●
selector.
If you are not receiving a signal from your cable service, contact the cable provider.
●
Refer to the Quick start guide that shows the connections for the HDMI or component input
●
mode.
Plugging in the AC power cord
Make sure all the necessary connections are made before the AC power
cord is plugged into an AC outlet.
Caution(s)
Connect the analog audio signal cables from the external device to the analog audio L/R input
●
jacks.
If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
●
Note(s)
Each time you plug in the AC power cord, no operations will be performed for several
●
seconds. This is not a malfunction.
11
Cable
Cable
OUT
OUT
OUT
Set-top box
Set-top box
IN
IN
OUT
OUT
OUT
OUT
Audio (L/R) +
Audio (L/R) +
Video cables
Video cables
IN
IN
OUT
OUT
OUT
Blu-ray Disc™ / DVD
Blu-ray Disc™ /
DVD recorder
recorder
Continued on next page.
.
English
Hide quick links:
Advertisement
Table of Contents
