Installing Batteries In The Remote Control; Connecting Cable, Rf Antenna, Or A Satellite Receiver To The Tv 75-Ohm Jack; Getting Started - Sanyo CLT2054 Owner's Manual

INSTALLING BATTERIES IN THE REMOTE
CONTROL
Use 2 "AAA" batteries (Not supplied).
Be sure batteries are installed correctly.
Note: Do not mix old batteries with new ones or mix differ-
ent types of batteries together.
CONNECTING CABLE SERVICE, RF ANTENNA,
OR SATELLITE RECEIVER TO THE TV
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authorities. To
TV BACK
receive cable programs, even with equipment which is
capable of receiving cable channels, the consumer must
subscribe to the cable company's service.
I
TV will automatically select the correct Antenna mode
for the type of Analog RF signal connected automatically.
Use "Antenna Selection" in the Setup menu to change the
Antenna Mode.
I
TV will switch off automatically after 15 minutes if there is no
signal reception (cable out or station not broadcasting).
6
Need help?
Visit our Web site at

GETTING STARTED

CABLE SERVICE
SATELLITE RECEIVER
VCR BACK
www.sanyoctv.com
Operational Tip for No
Signal Connection:
RF ANTENNA
If the TV is used as a monitor only,
with a DVD player or some other type
of external equipment, and no cable or
antenna signal is available, the follow-
ing setup is necessary:
Your TV is designed to automatically
search for available channels. There-
fore, the initial start up requires that
you press the CH L key, enabling the
TV to automatically go through the
channel search process before you can
operate the TV. After the initial channel
search is completed, you must press the
CH L key again to complete the
channel search process. This may take
several minutes.
After the channel search process is
complete (2 searches), you can press
the INPUT key on the remote control
to use the TV as a monitor.
Exception—When the Video mode is selected, the TV will not
automatically switch off when signal reception has stopped
for 15 minutes.
I
If you move the TV to a new location, press the RESET key
twice after connecting the signal and turning on the TV.
1-800-877-5032
or Call