Setting Your Location To Home; E-Sticker; Language - Sanyo FW32D08F Manual

Setting your location to home

You can set the Location of your TV to Home or Retail. Choosing Home
gives you full flexibility to change predefined settings for picture and
sound.
1
Use H I to select Location, then press OK.
Picture Accessibility
Sound Child lock
Setup HDMI-CEC
Features Location

Language

E-sticker

USB Software upgrade
2
Use H I to select Home or Retail, then press OK.
The unit will be set up with predefined settings
for retail displays. In this setting, the power
Retail
consumption may possibly exceed the limit
requirement of the ENERGY STARN qualification.
This setting is ENERGY STARN qualified.
The unit is set to maximize the energy efficiency
Home
for home setting and it can be adjusted through a
choice of picture and sound quality selections
according to your preference.
Note(s)
You must set Home in the menu. Otherwise, personalized picture and sound settings will
●
not be memorized after the unit goes into standby mode.
E-sticker
When you set Location to Retail store, E-sticker (Electronic Sticker) is
displayed. E-sticker can be turned off using procedure below.
1
Use H I to select E-sticker, then press OK.
2
Use H I to select Off, then press OK.
Off You can turn off E-sticker.
Top
E-sticker is displayed on top of the TV screen.
Bottom E-sticker is displayed on bottom of the TV screen.
Note(s)
If you set Location to Home, E-sticker will not be displayed.
●
Language
1
Press MENU and use H I to select Language, then press OK.
Picture
Sound
Setup
Features
Language
USB
Home
- -
2
Use H I to select English, Español or Français, then press OK.
If you need the English menu instead of the Spanish or French menu's, press MENU.
●
Use H I to select Idioma or Langue, then press OK.
Use H I to select English then press OK.
Press MENU to exit the main menu.
Select your menu language.
Seleccione el idioma para el menú.
Sélectionnez la langue du menu.
Note(s)
30 .
English
English
Español
Français
Continued on next page.