Table of Contents
Advertisement
4. LEDs Conditions Defined
4.1 LEDs Defined
The 16-port Switch LEDs provide useful information about the switch and the
status of all individual ports.
LED
STATUS
Power
ON
Display
Green
Mode**
Yellow
LEDs of
if in "Link /
Port 1~16
Act" function
if in "FDX /
Col." function
Green
Yellow
** The Display Mode is switched by the "PUSH" (a push button switch) on the panel.
Green : Link / Act
Yellow : FDX / Col
1
Display
Mode
Power
9
CONDITION
Switch is receiving power.
The LED function of Port 1 ~ 16 is "Link / Act".
The LED function of Port 1 ~ 16 is "FDX / Col."
(Full Duplex / Collision).
ON
Port has established a valid link.
Flashing
Data packets being received or sent.
ON
The connection is Full Duplex.
Flashing
Packet collisions occurring. A low
level of collision is a part of normal
Ethernet Operation.
The connection speed is 100Mbps.
The connection speed is 10Mbps.
Yellow : 10M / Green : 100M
2
3
4
5
6
7
10
11
12
13
14
15
Display
8
Mode
PUSH
16
Advertisement
Table of Contents
