Table of Contents
Advertisement
1.2
SCOPE
These operating instructions contain all the necessary information required to allow the safe operation
of the Niftylift TD150T (TD42T), mains electric (AC), diesel (D), petrol/gasoline (P) engine, or a
combination of these.
For further technical information, circuit diagrams and specific instructions for all maintenance which
may need to be carried out by specialist trained personnel, see the associated Workshop and Parts
manual for your model of Niftylift TD150T (TD42T).
1.3
INTRODUCING THE TD150T TRACK DRIVEN (TD) SERIES
Please note at the time of going to press all information, illustrations, details and descriptions contained
herein are valid. Niftylift reserves the right to change, modify or improve its products without any
obligations to install them on previously manufactured machines.
If you require further information after reading this manual, please do not hesitate to contact us.
Niftylift Ltd, Fingle Drive, Stonebridge, Milton Keynes MK13 0ER, Great Britain
Tel: +44 (0) 1908 223456
Niftylift Inc, 32 Concourse Way, Greer, SC 29651 USA
Tel: +01 864 968 8881 Fax: +01 864 968 8836
Nifty Pty Ltd, 265 King Street, Newcastle, NSW 2300, Australia
Tel: +61 (0) 2 4929 6700Fax: +61 (0) 2 4925 2570
The Niftylift TD150T (Track Drive) is an extremely versatile articulated boom platform of unique and
simple design. It is capable of placing two men and his tools up to a height of 14.70m (48ft 3 ins) or
an outreach of 7.55m (24ft 9in).
The booms are mounted via a 400 o powered swing mechanism on to a compact base mounted on
rubber tracks. The fourth boom is telescopic, and when combined with the use of the articulating
booms gives an outstanding working envelope. The powered tracks enable the machine to reach areas
previously thought unattainable.
The four outriggers make a simple and swift set up possible. A unique pressure sensitive micro switch
system fitted to each outrigger prevents operation of the machine until all outriggers have been
correctly deployed and also provides a loud audible alarm warning of a possibly hazardous situation.
Standard build is four fully hydraulically operated outrigger legs, with integral load holding valves
mounted on each outrigger cylinder.
A simple, all-hydraulic proportional control system gives smooth, reliable movement of the platform
and maximum reliability in the harshest environments.
Models include the following:
DAC: - DIESEL & AC ELECTRIC
D: - DIESEL ONLY
P: - PETROL ONLY
English/USA 12/09
Operating & Safety Instructions
Fax: +44 (0) 1908 312733
PAC: - PETROL & AC ELECTRIC
PG: - PETROL & LPG (PROPANE)
TrackDrive (TD) Series
Courtesy of Crane.Market
3
Advertisement
Table of Contents
