Table of Contents
Advertisement
ALL MODELS
11)
Push and hold green power button.
12)
Select the boom function required and operate hand levers in full accordance with
manufacturers Operating and Safety manual.
13)
When not in use return machine to stowed position, fully raise and stow all outriggers, turn the
key to the "OFF" position (anti-clockwise) and remove key.
EMERGENCY PROCEDURES
1)
Push in red emergency stop to shut down all functions.
2)
Use emergency hand pump to provide motive power and manoeuvre the machine as normal
using the hand levers (Platform or Base).
PLATFORM CONTROL STATION
MIN
1)
Emergency Stop Button – Push to operate, twist knob to re-set to the 'Out' position.
2)
Max RPM Selector – Switches between the High and Low Rev setting on the engine. High
speed is not available if booms are in operation or machine is driven on an excessive slope
0
(>10
English/USA 12/09
8
1
9
MAX
3
2
4
5
10
7
6
11
).
TrackDrive (TD) Series
Operating & Safety Instructions
S1
S2
S4
S3
12
13
14
15
P19926/03
29
Courtesy of Crane.Market
Advertisement
Table of Contents
