Table of Contents
Advertisement
4.5.7
REPLACEMENT
If components are replaced, they must be genuine Niftylift parts. The accuracy and function of the
cage weigh system relies on the like-for-like application of the component parts.
circumstances should you permit a machine with a defective cage weigh assembly to enter
service.
If in doubt about the operation or function of your machine, always request the circuit diagram that
goes with the machine serial number. Look at the bottom of the machine serial plate; one of the final
two numbers stamped there will give the electrical circuit for the machine. ('D80000' number, plus the
issue status immediately afterwards: - /01;/02;/03; etc, see Section 1.5 & 1.5a, pages 5/6)
If in doubt, contact the Niftylift Service Department on (44) 01908 223456, Fax: 01908 227460.
English/USA 12/09
TrackDrive (TD) Series
Operating & Safety Instructions
Courtesy of Crane.Market
Under no
33
Advertisement
Table of Contents
