Table of Contents
Advertisement
Available languages
Available languages
Door Reversal (optional)
Tools needed:
Min. 8" long TORX
T20
®
® †
screwdriver
1.
Remove door lock screws
Remove the two trim screws located above and below
the door lock, to the left of the door opening.
2.
Remove door lock
Press the small knob above the door lock with a small
screwdriver. At the same time, push up on the door lock
and pull it towards you.
® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
†
#2 Phillips screwdriver
3.
Remove two screws on door hinge
4.
Remove door and gently lay
front-side-down on soft surface
25
Advertisement
Table of Contents
