Vita-Mix VM0122 Owner's Manual page 5

DISPLAY WINDOW - This area, depending on what button is pressed, displays a
OWNER CONTROLS - A control panel accessible by pressing the Vita-Mix logo.
READY
MODE
TEMP COUNT TOTAL
NORM 25 100
VITA-MIX SMOOTHIE
PROGRAM
4 TO OVERWRITE
CURRENT PROGRAM
HIGH/LOW PULSE button - The pulse provides a quick increase or decrease in
speed of the blades when blending. Press H to increase the motor to speeds that
range from 51%-100%. Press L to decrease the motor speed down to a range of
50% -7%. The PULSE button will override the running program (as long as it is
depressed). Once released the original program continues its cycle.
• The PULSE high (H) and low (L) speed is set by using the SPEED
CONTROL buttons. To set, while pressing and holding a PULSE button,
press the SPEED CONTROL L or M button until the desired motor speed
is reached. The PULSE speed will remain at this setting until changed again
with the SPEED CONTROL buttons.
variety of operation messages. A "READY" message appears
when there is power to the machine.
• Press once to reveal the mode message. Press button
1 then 6 within five seconds to continue. Once the correct code
is entered the display will indicate the motor temperature
(NORM, WARM, HOT), a usage count and a total. The
"COUNT" is a machine usage total and can be reset. This
can be used to keep a count of the number of drinks sold in
a week, day or even an hour. To clear, press and hold the
START/STOP button for 5 seconds. The "TOTAL" keeps track
of the machine usage, including production and testing, and
cannot be cleared.
• Press twice to reveal the name of the program controlling
the PRE-SET buttons. If you are using the MP settings,
this will read VITA-MIX SMOOTHIE PROGRAM.
• Press a third time to reveal an option to reset the
PRE-SET buttons to the original factory settings.
• Press a fourth time to exit and continue blending.
5