teca TLC-700 Product Information Packet page 8

In order to use tune option with the controller for cool only set up, the controller should be set up with PID STYLE COOL ONLY settings.
Follow the steps outlined below to change the controller settings from ON/OFF STYLE to PID STYLE COOL ONLY .
Method 1:
- In LEVEL 3 change the rsEt value to All.
- Change the settings in LEVEL 1 through LEVEL 4 to match the settings in the PID STYLE COOL ONLY set up.
Method 2:
- In LEVEL 2 change the unit value to nonE.
- In LEVEL 3 change the sp1.d value to rLy2 and sp2.d to rLy1.
- Change the settings in LEVEL 1 through LEVEL 3 to match the settings outlined in PID STYLE COOL ONLY set up.
rsEt All
unit nonE
sp1.d rLy2
sp2.d rLy1