teca TLC-700 Product Information Packet page 6

TC-3300 SET UP (ON/OFF STYLE)
To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds.
Press and hold UP or DOWN button to navigate through the menu.
To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values.
Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
To set the main temperature: Press and hold * button, then use UP or DOWN buttons to enter the new
value.
LEVEL 1:
tune off
bAnd 0.5
int.t 5.0
dEr.t 25
dAc 1.5
cyc.t on.off
oFst 0
sp.Lk off
sprr 0
sprn off
soAk - -
sEt.2 0.2
bAnd.2 0.5
cyc.2 on.off
LEVEL 2:
Manual control modes
sp1.p (as is)
hAnd off
pL.1 100
pL.2 100
sp2.A dv.hi
sp2.b nonE
disp 0.1
hisc 70
Lo.sc -10
inpt tc t
unit c
LEVEL 3:
Output configuration
sp1.d ssd1
sp2.d ssd2
burn 1u.2d
rEu.d 1r.2r
reu.L 1n.2n
spAn 0.0
zEro 0.0
chEk off
rEAd Var
tEch ctA
uEr
(see note)
rsEt nonE
Note: "uEr" value is preset and can not be changed, however it
provides access to LEVEL 4. Press and hold UP and DOWN
buttons for 10 seconds to access LEVEL 4.
LEVEL C only visible when COMMS option fitted.
Set SP1 (main temperature set point) to 10 C.
Rev A: Changed SP1 from 25C to 10C.
LEVEL 4:
Lock nonE
Prog Auto
no.AL on
dis.s 6
dEr.s 0.5
LEVEL C:
COMMS menu
Addr 1
bAud 9600
dAtA 18n1
dbuG off
11/02/99/AA