Solid state liquid chiller with integral tc-3300 temperature control (10 pages)
Summary of Contents for teca RLC-1402HC
Page 1
If you have any questions with your equipment, please do not hesitate to call us toll free at (888) TECA-USA (832-2872), we will be happy to assist. We are open from 8:00 am to 4:30 pm Central Time.
PID control method and then performing an autotune for better temperature control. We hope you enjoy your new Ameritemp™ series liquid chiller. If you have any questions, please do not hesitate to call our technical department @ 888-TECA-USA (888-832-2872). Position this tubing upwards...
• Remote sense capability • Low pressure drop fluid quick connects OPTIONS APPLICATIONS • Heating Teca Liquid Chillers are ideal for rack mount applications such as laboratory, • RS-232 or RS-485 interface laser, x-ray, out-patient, medical therapy • Computer communication software and electronics.
Page 4
Air Cooled Liquid Chillers RLC-1400 PERFORMANCE CURVE COOLING CAPACITY 410 Watts @ 0 °C T Equation of line: y= T(°C) x=Capacity (Watts) Ambient Temp 25°C 50°C Fluid Supply y=.08x-33.1 y=.08x-36.1 DIMENSIONS Dimensions are inches www.teca-eu.com TECA 1-888-TECA-USA (832-2872)
Page 8
TC-3300 SET UP (ON/OFF STYLE) To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds. Press and hold UP or DOWN button to navigate through the menu. To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values. Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
Page 9
TC-3300 SET UP FOR Cool & Heat/Cool Cold Plates, Chillers To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds. Press and hold UP or DOWN button to navigate through the menu. To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values. Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
TECA’s products within one year after the date they are delivered to Buyer, and if : (a) TECA is notified of the defect in writing by certified mail within 14 days of the date of discovery; (b) TECA may then either, at its sole discretion, inspect the product at Buyer’s location, or require that the product be made...