teca TLC-702 Product Information Packet
Solid state liquid chiller with tc-3300 temperature controller and rs-232 communications
Hide thumbs
Also See for TLC-702:
- Product information packet (6 pages) ,
- Product information packet (9 pages) ,
- Product information packet (10 pages)
Advertisement
Quick Links
Temperature Controller and RS-232 Communications
Thank you for your purchase. Information has been enclosed regarding the
installation, specifications, and wiring of your solid state assembly.
Please read and follow all instructions carefully before installation. Only
qualified technicians should install this equipment.
If you have any questions with your equipment, please do not hesitate to call
us toll free at (888) TECA-USA (832-2872), we will be happy to assist. We
are open from 8:00 am to 4:30 pm Central Time.
Included in this packet you will find:
Getting Started
Product Literature and Specifications
Wiring Drawing # SK010909
Temperature Control Literature Set-Up and Communications Information
Warranty Information
TC-3300 Manual
Product Information Packet
Model TLC-702
Solid State Liquid Chiller with TC-3300
Part #6-A0D2-0-005
Advertisement
Related Manuals for teca TLC-702
Summary of Contents for teca TLC-702
- Page 1 If you have any questions with your equipment, please do not hesitate to call us toll free at (888) TECA-USA (832-2872), we will be happy to assist. We are open from 8:00 am to 4:30 pm Central Time.
-
Page 2: Getting Started
PID control method and then performing an autotune for better temperature control. We hope you enjoy your new Ameritemp™ series liquid chiller. If you have any questions, please do not hesitate to call our technical department @ 888-TECA-USA (888-832-2872). Position this tubing upwards while filling the lines... - Page 6 TC-3300 SET UP (ON/OFF STYLE) To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds. Press and hold UP or DOWN button to navigate through the menu. To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values. Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
- Page 7 TC-3300 SET UP (PID STYLE) FOR COOL ONLY. To access the set up menu push and hold UP and DOWN buttons simultaneously for 3 seconds. Press and hold UP or DOWN button to navigate through the menu. To change settings: Press and hold * button, then use UP or DOWN buttons to enter new values. Press and hold UP and DOWN buttons simultaneously for 3 seconds to exit the set up menu.
- Page 8 In order to use tune option with the controller for cool only set up, the controller should be set up with PID STYLE COOL ONLY settings. Follow the steps outlined below to change the controller settings from ON/OFF STYLE to PID STYLE COOL ONLY . Method 1: rsEt - In LEVEL 3 change the rsEt value to All.
-
Page 9: Declaration Of Conformity
700, 702 YEAR OF MANUFACTURE Refer to the first two digits of the serial number on the manufacturers ID label MANUFACTURER TECA Corporation 4048 W. Schubert Ave. Chicago, IL, 60639 U.S.A. APPLIED STANDARDS Application of Council directive: Machinery Directive (89/336/EEC) -
Page 10: Limited Warranty
TECA’s products within one year after the date they are delivered to Buyer, and if : (a) TECA is notified of the defect in writing by certified mail within 14 days of the date of discovery; (b) TECA may then either, at its sole discretion, inspect the product at Buyer’s location, or require that the product be made...